1 / 2
Funssor Aluminum AB Y Endstop Cover Left and Right
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Funssor Aluminum AB Brackets for Voron Printer bracket with Y Endstop Relocation. (It's OldGuyMeltsPlastic's Fault)
- Ocena
- 0 / 5
- Polubienia
- 21
- Pobrania
- 91
- Wydruki
- 0
- Wyświetlenia
- 781
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (31)Powiązane
The Funssor Aluminum AB Upgrade kit is missing a couple things, 1, an endstop relocation for Y axis, and 2, a way to install an Umbilical for wires eliminating the cable chains in order to reduce mass and vibrations.
Printing Instructions:
Preferably ABS, ASA or anything tougher
NO PLA, PETG
Voron PIF Standards:
Layer height: 0.2mm
- Extrusion width: 0.4mm, forced
- Infill pecentage: 40%
- Infill type: grid, gyroid, honeycomb, triangle, or cubic
- Wall count: 4
- Solid top/bottom layers: 5
- Supports: NONE
and a calibrated Printer of course.