Orange Pi Zero 3 Case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a case for the Orange Pi Zero 3
- Rating
- 4.8 / 5
- Likes
- 252
- Downloads
- 4,232
- Makes
- 25
- Views
- 16,152
- Reviews
- 20
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a simple case I designed for the Orange Pi Zero 3.
You will need to print the base and select the top cover of your choosing. Personally, I like the external antenna versions. Simply run the antenna wire in the slot above the SD card and place the antenna in the retention slots.
Required Hardware:
- 4x - 20mm M3 Socket Head Cap Screws
- 4x - M3 Nuts
Print settings:
- Layer Height: 0.2mm
- Wall Thickness: 1mm minimum
- Top/Bottom Thickness: 1mm minimum
- Infill: 100% (recommended)
- Avoid Crossing Perimeters (Combing): Enabled (reduce stringing in hex pattern)
- Supports: I recommend supports only for the bolt/nut recess holes.
- Adhesion: If you have poor adhesion use a bit of glue stick
Modification requests may be entertained. I am considering adding additional GPIO/Debug UART Access, Heat-Set insert versions, etc.
Please post your makes and let me know how it works out for you!
~~~~~~~~~~ Update Log ~~~~~~~~~~
8/13/2023 -Modified extrusion mount geometry to work with V-Slot + T-Slot + Easier Printing
8/5/2023 - Added options to mount to 3D printer v-slots with M3 or M4 8mm bolts
8/4/2023 - Added thicker HEX pattern for those using nozzles larger than 0.4mm