File Box (print-in-place)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
print in place file box for storing up to 12 files
- Rating
- 5 / 5
- Likes
- 30
- Downloads
- 150
- Makes
- 2
- Views
- 813
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Summary:
This is one of my first models using Fusion360. It is a simple box to store up to 12 files. It prints in place with a working hinge and keeps closed using magnets.
Files:
The files are about 150mm in length and the diameter, where the clips of the box snap on, is 3mm.
Closing mechanism:
The box prints in place - you only need to load the file into your slicer and it comes out with a working hinge. Both handles on the left and right side have holes to insert magnets to keep the box closed safely. The holes are dimensioned to hold 6x2mm magnets.
Printing:
You can completely print this without supports, although i recommend using them. The handels just print way cleaner, if you support them. It is quite a distance between the two support surfaces and whether you need supports or not depends on how well your printer is calibrated and deals with bridging.