1 / 3
Simple shelf support peg
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Support pin/peg for wardrobes, bookshelves, etc. that use pre-drilled holes
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 59
- Makes
- 0
- Views
- 187
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution
Super simple shelf support pin/peg for wardrobes, bookshelves, etc. that use pre-drilled holes and pegs to hold up flat board shelving.
Prints with no supports. Consider adding brim.
You may need to do a test print to size my STL file up or down a little if the peg is too loose or tight, respectively.
NOTE: This is an asymmetric pin, designed to be printed with the largest flat side touching the build plate.