Wire Rack TPU Padding
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I designed these to add padding to the support poles of this rack. Designed for a pole with a ~25.5 diameter.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 17
- Makes
- 0
- Views
- 216
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Public Domain
This part is not designed by a professional, use it at your own risk.
Because I'm not using a top rack in this configuration it leaves the tops of the poles exposed and it's a potential hazard. I wanted to add some padding that holds itself in place. Really this is just to stop me from whacking my arm on the top of the pole.
There is a small hole in the middle of the object to prevent vacuum seal.
Print out of TPU. You can use a 0.4 or a 0.6 Nozzle.
In the pictured example I used Filaflex 70A ‘Ultra-Soft’ printed on a Prusa MK3S+ with a Revo 0.6 Nozzle.
Bonus tips for printing 70A on a Prusa MK3S+:
Keep the speed ~20-25 mm/s
Heat the nozzle to 245c
Use a 0.6 nozzle
0.2 Layer Height
No Fan Cooling