Wire Rack TPU Padding
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I designed these to add padding to the support poles of this rack. Designed for a pole with a ~25.5 diameter.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 216
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Public Domain
This part is not designed by a professional, use it at your own risk.
Because I'm not using a top rack in this configuration it leaves the tops of the poles exposed and it's a potential hazard. I wanted to add some padding that holds itself in place. Really this is just to stop me from whacking my arm on the top of the pole.
There is a small hole in the middle of the object to prevent vacuum seal.
Print out of TPU. You can use a 0.4 or a 0.6 Nozzle.
In the pictured example I used Filaflex 70A ‘Ultra-Soft’ printed on a Prusa MK3S+ with a Revo 0.6 Nozzle.
Bonus tips for printing 70A on a Prusa MK3S+:
Keep the speed ~20-25 mm/s
Heat the nozzle to 245c
Use a 0.6 nozzle
0.2 Layer Height
No Fan Cooling