1 / 1
Voron 2.4 5015 Bed Fan (Purge Bucket + No Z-Endstop) — image 1

Voron 2.4 5015 Bed Fan (Purge Bucket + No Z-Endstop)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A mounting panel which supports a Sunon 5015 blower fan to circulate air under the bed for improved chamber heating.

Rating
5 / 5
Likes
11
Downloads
50
Makes
1
Views
1,279
Reviews
1

Updated at source:

Model information

License
Creative Commons — Attribution — Share Alike

This remix of Ślimak's original provides an option for those folks running a purge bucket without a z-endstop (in my case because I'm running Voron Tap). It also addresses the problem of being unable to remove your purge bucket when this is fitted (by removing the left hand side of the original and re-working the airflow to compensate).

Bill of Materials

You'll need the following to assemble this:

  • 5015 blower fan (Sunon/Delta etc)
  • 4x M3 T-nuts
  • 4x M3x6 FHCS

When attaching the fan, you may find it useful to place some 1mm foam tape on the bottom of the fan to reduce vibrations against the bottom panel.

Printing Guidance

This part is designed to be printed using the standard Voron structural parts settings, namely:

  • 0.4mm nozzle
  • 0.2mm layer height
  • 40% infill (grid/cubic/gyroidal/honeycomb)
  • ABS/ASA

Tags