Wheaton Bottle Washer
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This model will wash six 250ml Wheaton bottles. It can be fed with a 3/8" hose connected to a pump or faucet.
- Rating
- 0 / 5
- Likes
- 17
- Downloads
- 193
- Makes
- 0
- Views
- 1,278
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Medical Tools
- License
- GNU General Public License v3.0
This model will wash six 250ml Wheaton bottles. It can be fed with a 3/8" hose connected to a pump or faucet. It has 4 adjustable legs that can accommodate 10mm round stick on rubber feet.
Use PTFE plumber's tape on the tapered threads and don't over tighten. If you have 3/8 NPT tap and dies you can clean up the threads before assembly. I found this wasn't needed because small leaks didn't matter.
Printed Specs:
- Filament: Hatchbox White PETG
- Infill: 15% for base, 50% for everything else
- Layer Height: 0.16mm for spouts and barbed adapter, 0.2mm for everything else
- Nozzle: 0.4mm
- Supports: Yes only on the spouts and barbed adapter
Base: Print the base with the flat top side on the print bed. Print with a strong brim to prevent warping. I designed a permanent brim on the base to help with this.
Barbed Adapter: Print with brim. Orient barbed side down on print bed.