Magic Bullet 11 Piece Lid Tray
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a simple storage tray designed to hold the 5 lid pieces of the Magic Bullet 11 piece personal blender set.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 25
- Makes
- 0
- Views
- 181
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution
This is a kitchen organizer for the 5 lid pieces of the Magic Bullet 11 piece personal blender set.
The model is a single block with chamfered edges and filleted slots for the Magic Bullet lids to slide into.
In the attached files you will find two models. One model has a 1.2mm shell pre-applied. One has no shell and is solid throughout the part.
I've also attached the corresponding .step files to make remixing/alterations simpler (Such as changing the thickness of the shell).
My Print Settings:
Layer Height: 0.28mm
Infill Density: 20%
Walls: 3
Supports: Yes (If using the solid model, you may not need supports)
Bed Adhesion: skirt