1 / 2
Voron Belt Pulling Tool
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Tool to help keep equal lengths on your ZX or XY belting
- Rating
- 5 / 5
- Likes
- 43
- Downloads
- 198
- Makes
- 7
- Views
- 1,375
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution
I needed a way to equally hold the belting to ensure I was getting equal tension.
I designed this puller tool that is multi-purpose.
Put the belt in backward for a straight edge to get your cuts equal and flush.
Put the ends of your belts towards the arrow on the part, that way the ends are flush and you're good to pull on them.
I use PIF standards for all my prints.
Layer height: 0.2mm
- Extrusion width: 0.4mm, forced
- Infill percentage: 40%
- Infill type: grid, gyroid, honeycomb, triangle, or cubic
- Wall count: 4
- Solid top/bottom layers: 5
- Supports: NONE