Slide Replacement for Garden Furniture
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.70 – €0.86 net (excluding VAT)
For file: Slide-spare-part_0.4n_0.2mm_PLA_MK3S_54m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.78 excluding VAT (range midpoint).
- Weight reported by the author
- 7 g
- Print time reported by the author
- 54.6 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Spare Part for Garden Loungers/Deck Chairs: 1-to-1 Reproduction, adjusted for PLA (No Support Required)
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 28
- Makes
- 0
- Views
- 207
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Public Domain
Features:
- for PLA adjusted height
- 1 to 1 replicant doesnt work for PLA → breaks on mounting
- no support needed
- but brim very helpful
Disclaimer!
- Clean Printplate needed for supportless print. Speaking from experience :(
- I'm not sure if PLA is the right material for this application because good abrasion resistance is needed
Should work for: sienagarden (Hornbach), Formentera (Linea Garden Friend), Nexos, Spetebo, …
Need Grip Replacement as well? Check out my other model
Your insights are welcome <3
German:
Ersatzteil für Gartenliegen/Badeliegen 1 zu 1 Nachbau für PLA angepasst (ohne Stütze möglich)
Besonderheiten:
- Modelhöhe für PLA angepasst
- 1 zu 1 Nachbau funktioniert für PLA nicht → bricht beim draufschnappen
- kein Stützmaterial nötig, kann aber bei schlechter Haftung helfen
- Rand ist hilfreich
Achtung!
- Saubere Druckplate für stützenlosen Druck nötig. Spreche aus Erfahrung :(
- Ich bin mir nicht sicher, ob PLA das richtige Material für diese Anwendung ist, da eine gute Abriebfestigkeit erforderlich ist
Sollte für folgende Liegen funktionieren: sienagarden (Hornbach), Formentera (Linea Garden Friend), Nexos, Spetebo, …