Rodent water bottle variable holding clamp 44 / 59mm
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a design to hold the typical auto-feeding water bottles inside a rodent cage.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 25
- Makes
- 0
- Views
- 189
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Pets
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a design to hold the typical auto-feeding water bottles inside a rodent cage. It has been optimized for printability and flexibility. The height of the holders and clamps may be varied freely. If your bottle has a different diameter to the provided sizes, feel free to clone my original design on tinkercad and modify it to your liking!
I just hope you post your mods here as remix or send them to me for inclusion in the STL library.
Print Settings
Rafts: No
Supports: No
Resolution: 0.15
Infill: 20%
Filament: ICE ABS+, Patona PLA, ABS
Notes:
Since the rods have a very limited base layer, I have provided STL data with extra support areas (look for FDM in the file name).
I recommend to print the rods in PLA or PET for stiffness and use ABS+ or ABS for the clamps.
I also recommend to print all parts with fan setting at 0%