Rodent water bottle variable holding clamp 44 / 59mm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a design to hold the typical auto-feeding water bottles inside a rodent cage.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 189
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a design to hold the typical auto-feeding water bottles inside a rodent cage. It has been optimized for printability and flexibility. The height of the holders and clamps may be varied freely. If your bottle has a different diameter to the provided sizes, feel free to clone my original design on tinkercad and modify it to your liking!
I just hope you post your mods here as remix or send them to me for inclusion in the STL library.
Print Settings
Rafts: No
Supports: No
Resolution: 0.15
Infill: 20%
Filament: ICE ABS+, Patona PLA, ABS
Notes:
Since the rods have a very limited base layer, I have provided STL data with extra support areas (look for FDM in the file name).
I recommend to print the rods in PLA or PET for stiffness and use ABS+ or ABS for the clamps.
I also recommend to print all parts with fan setting at 0%