Shipping Container Box
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A small-ish shipping container box with lid
- Rating
- 5 / 5
- Likes
- 78
- Downloads
- 692
- Makes
- 3
- Views
- 2,770
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A small-ish box, shaped like a shipping container. It's modeled from the ground up for FDM-printing, so there are no super-thin walls, steep overhangs and there's no support needed anywhere.
There are three parts: container, lid and guide. The last two are bundled in one STL-file. Just glue the guide into the lid after printing and you are done!
pro tipp: You can insert a color change after the bottom of the container for it to match the lid color =)
Print Settings
Printer Brand: Prusa
Printer: i3 MK3 (modified)
Rafts: No
Supports: No
Resolution: 0.2mm
Infill: 20% gyroid
Filament: Extrudr PLA white & signal green
Notes:
The container wall thickness is optimized for a line width of 0.44mm @ 0.2mm layer height.