add-e motor plug and mounting socket protection cap
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a protection cap for the add-e motor plug.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 30
- Makes
- 0
- Views
- 299
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a protection cap for the add-e motor plug. add-e is a bike electrification kit that can be added and removed from a bike very quickly.
The cap is meant to protect the motor plug and mounting socket from dirt while the motor is not mounted, e.g. when you drive around without a motor.
This is meant to be printed in TPU (flexible filament) only!
It will probably not fit when printed in PLA.
There are two STL files available, one is just a cap for the plug, the other one combines the cap with a motor mount socket protector.
If you like this, you might also like:
Print instructions
Printer Brand: Anycubic
Printer: All-metal Mega
Rafts:No
Supports: No
Resolution: 0.2mm
Infill: 20%
Filament: FlexiSmart TPU grey
Notes:
Do not print this in PLA, it will probably not fit well.