MK4 X-Carriage IGUS Upgrade
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple upgrade to use IGUS Drylin RJM-01-10 bearings instead of the original LM10LUU bearings.
- Rating
- 5 / 5
- Likes
- 53
- Downloads
- 85
- Makes
- 1
- Views
- 2,815
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The original LM10LUU is 55mm long and the IGUS bearings are 29mm long and wanted to add 2 bearings per side.
So i had to modify the part to make the 2 IGUS bearing fit.
!-important-!
You should NOT add the robber pads on the inside.
This will squeeze the IGUS bearings and the rod will not move freely anymore
Original part at the bottom and new on top.
You need 4 of RJM-01-10 (i also tried RJUM-01 and RJ200UM-01 but where to tight)
https://www.igus.eu/product/986?artNr=RJM-01-10
And 2 of AWMP-10 - 325mm
https://www.igus.eu/product?artNr=AWMP-10
Also look at my other IGUS upgrade :)
https://www.printables.com/model/175765-igus-drylin-linear-rail-upgrade