The Division - Shoulder Beacon
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
NOTE: SEE v3 HERE: http://www.thingiverse.com/thing:1411233 Here is a costume prop for Tom Clancy's The Division video…
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 47
- Makes
- 0
- Views
- 738
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Props
- License
- Creative Commons — Attribution — Share Alike
NOTE: SEE v3 HERE: http://www.thingiverse.com/thing:1411233
Here is a costume prop for Tom Clancy's The Division video game. It's some kind of shoulder beacon / gizmo that all the characters wear. I'm not really sure what it does in the game, but if you're making a costume for The Division, you'll need one.
Specs:
*Dimensions: 4.250"W x 2.250"D x 1.080"H (assembled)
*Volume: 1.08 cubic inches (all parts combined)
*Weight: ~0.04 pounds (all parts combined)
Files:
*Top of housing: PTW-00-1-PT-0232 (The Division, Shoulder Beacon, Top).STL
*Bottom of housing: PTW-00-1-PT-0233 (The Division, Shoulder Beacon, Bottom).STL
*Lens: PTW-00-1-PT-0234 (The Division, Shoulder Beacon, Lens).STL
*Opaque center of lens: PTW-00-1-PT-0235 (The Division, Shoulder Beacon, Lens Center).STL
Needed to complete assembly:
- Screws for case
- Orange LED(s), with batteries
NOTES:
- .STL names do not match .SLDPRT name because Da Vinci will not print file names over 56 characters.
- .STL files oriented for printing.
- Supports are needed to print the top housing. No supports needed for printing other parts.
Print instructions
Category: Props Summary
NOTE: SEE v3 HERE: http://www.thingiverse.com/thing:1411233
Here is a costume prop for Tom Clancy's The Division video game. It's some kind of shoulder beacon / gizmo that all the characters wear. I'm not really sure what it does in the game, but if you're making a costume for The Division, you'll need one.
Specs:
*Dimensions: 4.250"W x 2.250"D x 1.080"H (assembled)
*Volume: 1.08 cubic inches (all parts combined)
*Weight: ~0.04 pounds (all parts combined)
Files:
*Top of housing: PTW-00-1-PT-0232 (The Division, Shoulder Beacon, Top).STL
*Bottom of housing: PTW-00-1-PT-0233 (The Division, Shoulder Beacon, Bottom).STL
*Lens: PTW-00-1-PT-0234 (The Division, Shoulder Beacon, Lens).STL
*Opaque center of lens: PTW-00-1-PT-0235 (The Division, Shoulder Beacon, Lens Center).STL
Needed to complete assembly:
- Screws for case
- Orange LED(s), with batteries
NOTES:
- .STL names do not match .SLDPRT name because Da Vinci will not print file names over 56 characters.
- .STL files oriented for printing.
Supports are needed to print the top housing. No supports needed for printing other parts.
Instructions
- Print the top housing with supports.
- Print the bottom housing, and lens center.
- Print the lens using a transparent material (e.g. clear PLA).
- If necessary, trim the flange on the lens until it fits into the top housing.
- While they may not print well, there are screw holes, and bosses, in the top and bottom housings. If they print sealed up, just drill them out.
- Put one or more orange LEDs inside the lens. Wire resistors and batteries to them, appropriately.
- "Save what remains." ;-)