Offset side rail for Sneaks Pi case on Prusa MK4
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Customized version of the Prusa MK3 side rail for Sneaks' RPi mount for the Prusa MK4 with provision for cable routing
- Rating
- 5 / 5
- Likes
- 8
- Downloads
- 43
- Makes
- 2
- Views
- 392
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Mount a Raspberry Pi in Sneaks' awesome deep snap-together case on a Prusa MK4 with it offset to the outside with provision for cable management.
Note: the actual thing in the photos is black and kinda blends into the Prusa frame. Sorry about that.
The Sneaks snap-together Raspberry Pi case is by far my favorite, not just cuz he's a great guy, but it's the best Pi case I've used, especially with the provisions to mount it to the side of Prusa printers.
I got a MK4 and wanted to use the case but discovered that it would work a little better if I shifted the Pi outboard, so modified the original “__ss_rail_1_04-MK3S_DEEP.STL” to shift where it held the RasPi. While I was at it, I added a post which I used to hold the cables coming from the RasPi with a loop of velcro. Posting bt request of @meathead so other Prusa MK4 users can do the same.
Note that this requires the use of the “deep” cases. I used the following files from Sneaks' Pi case:
- __raspi_top_1_06A-SS_4_DEEP.STL
- __raspi_bottom__1_05-SS_4.STL
- __raspi_module_1_01-SNAP-IN FAN.STL
Get those files (or whatever fits your use case) from the original - this is just the offset rail to mount that on the MK4.
Print instructions
Print it pretty much however you want, following Sneaks' original instructions would be a safe bet. Supports are not needed since the cable post should bridge just fine.