Duotone Unit wing optional handle (fix or variable)
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€6.83 – €8.34 net (excluding VAT)
For file: Unit_v6_und_Endstuck_25mm_rohr_und_22mm_rohr_0.15mm_PETG_MINI_9h3m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €7.59 excluding VAT (range midpoint).
- Weight reported by the author
- 69 g
- Print time reported by the author
- 9.05 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This is a optional handle between the front and back handle for the UNIT Wing 2022/23 of DUOTONE..
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 162
- Makes
- 0
- Views
- 1,449
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial
You can build this handle with two of the 3d printed parts. Additional you need a 25mm or 22mm fiber tube of 1mm wall thickness.
With “vetro” strips you mount the optional handle between the front and back handle. The superglue is used to connect the parts together. There are stl files for 22mm and 25mm tubes. You have to adapt the length of the tube for your size of wing.
If you have more then one Unit you can make a variable boom. Take a 22mm tube and a 25mm tube together, so you can make a boom for 6,5 to 4,5m² or 6.0 to 4.0m² wings. There are stl files for end sleeves for 25mm and 22mm with 0,1 and 0,2mm tolerance. Also freecad files are provided. In the spreadsheet of the unit_v2 file you can calculate the length of the tubes for the wings I have measured. Feel free to send me a message if you have questions.
The fix boom has to be mounted before and the variable boom after the wing is filled with air.
I used Prusament PETG Carbon Fiber Black for the part.
The handle works very well for me, especially during manoeuvres.