1 / 4
BTT Pi V1.2 40mm Fan Holder — image 1
1 / 4

BTT Pi V1.2 40mm Fan Holder

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A 40 mm fan holder for the BigTreeTech (BTT) Pi V1.2.

Rating
5 / 5
Likes
29
Downloads
351
Makes
5
Views
1,695
Reviews
5

Updated at source:

Model information

Category
Electronics
License
Creative Commons — Attribution — Noncommercial

I wanted to mount a Noctua fan onto my BTT Pi, as I have one on my Raspberry Pi 4, and it keeps it pretty cool. No models were available for a simple fan holder - so why not learn CAD and make one yourself?

There is approximately 2-3 mm clearance from the bottom of the fan mount to the top of any connectors underneath. The frame surrounding the fan was made in a circular shape to prevent the airflow from being inhibited; though, this may block off some of the connectors as a tradeoff…

Print settings used:

  • Material = PLA
  • Temp = 215 degrees C
  • Nozzle Size = 0.4mm
  • Layer Height = 0.2mm
  • Line Width = 0.4mm
  • Build Plate Adhesion = Brim

Materials/Hardware Needed:

  • 4x M3 screws for fan (though, 2 holds it just fine…)
  • 4x M2.5 hot melts, for underside to mount to BTT Pi
  • 4x M2.5 screws

The STEP file has been included also just in case someone needs to make alterations!

Tags