BTT Pi V1.2 40mm Fan Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 40 mm fan holder for the BigTreeTech (BTT) Pi V1.2.
- Ocena
- 5 / 5
- Polubienia
- 29
- Pobrania
- 351
- Wydruki
- 5
- Wyświetlenia
- 1693
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
I wanted to mount a Noctua fan onto my BTT Pi, as I have one on my Raspberry Pi 4, and it keeps it pretty cool. No models were available for a simple fan holder - so why not learn CAD and make one yourself?
There is approximately 2-3 mm clearance from the bottom of the fan mount to the top of any connectors underneath. The frame surrounding the fan was made in a circular shape to prevent the airflow from being inhibited; though, this may block off some of the connectors as a tradeoff…
Print settings used:
- Material = PLA
- Temp = 215 degrees C
- Nozzle Size = 0.4mm
- Layer Height = 0.2mm
- Line Width = 0.4mm
- Build Plate Adhesion = Brim
Materials/Hardware Needed:
- 4x M3 screws for fan (though, 2 holds it just fine…)
- 4x M2.5 hot melts, for underside to mount to BTT Pi
- 4x M2.5 screws
The STEP file has been included also just in case someone needs to make alterations!