1 / 11
Orbiter 2.0 SensorHousing Simplified
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Modified housing for the filament sensor on the Orbiter 2.0 with an ECAS fitting.
- Rating
- 5 / 5
- Likes
- 37
- Downloads
- 168
- Makes
- 2
- Views
- 958
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
This is my modified housing for the filament sensor on the Orbiter 2.0. I added an ECAS fitting and compared to the original, I only used an Omron D2F microswitch with a ball. There are two variants, for 5mm and 5.5mm. Print 0.2mm layer, ECAS side to the bed.
Do not forget to break off the built-in support in the ECAS hole.