U-Bolt Pro weatherproof cover
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a cover for the U-Bolt Pro Smart Lock to protect the electronics from the elements.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 22
- Makes
- 0
- Views
- 262
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The fingerprint reader on my Ultraloq U-Bolt Pro stop responding, and I suspect it succumbed to the repeated direct sunlight and rain. Support was nice enough to send me a new fingerprint reader even though it was outside of their (too short) warranty period, and I want to try to protect this one.
This cover will (hopefully) protect against sunlight and rain, but still make the fingerprint reader useable without needing to take the cover off. If you need to enter a code or use the key, the cover can be pulled off easily and then replaced once the door is opened.
This box is slightly curved, so I'd recommend using supports on the build plate.
Printed in PLA with a 0.6mm nozzle, but use whatever you like. It's a pretty straightforward model.