M5 thumbscrew for socket head screw
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Turn a standard M5 socket head screw into a thumbscrew.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 60
- Makes
- 0
- Views
- 374
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Turn a standard M5 socket head screw into a thumbscrew. I've used this in my own designs, and most recently replaced the flat thumbscrews on the Lansky sharpening system with these which will be easier to turn.
Designed for a press fit, so includes the parts to press it into place.
See the photos for how to assemble. Screw goes into the thumbscrew part, then that goes into the press piece and the head piece goes in the socket end of the screw. Knipex Pliers Wrenches are perfect for the pressing operation, although something like a vise can do. There's provision in the head piece for a 5x2mm magnet, because otherwise it can be a bit finicky to stack all the parts together.
Three pieces:
- M5 thumbscrew
The actual part - M5 thumbscrew press spacer
The threaded part of the screw goes in here for the pressing operation. If your screw is longer, scale this in the Z dimension so there is room. Make it at least as long as the screw you're pressing in, but a couple mm longer is a good idea. - M5 thumbscrew head press
This goes in the screw head to make sure it gets fully pressed in, as it should be slightly below flush. Has a hole for an optional 5x2mm magnet to help it stick to the pressing tool.
Printing instructions
I've printed in all types of materials, so that's up to you. Very little vertical detail so layer height is also up to you, although I usually use 0.2mm because I print this at the same time as the item I most commonly use it on. I will usually up shells to 3 or maybe 4 but that isn't absolutely necessary.