1 / 10
M5 thumbscrew for socket head screw — zdjęcie 1
1 / 10

M5 thumbscrew for socket head screw

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Turn a standard M5 socket head screw into a thumbscrew.

Ocena
0 / 5
Polubienia
6
Pobrania
61
Wydruki
0
Wyświetlenia
378
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Turn a standard M5 socket head screw into a thumbscrew. I've used this in my own designs, and most recently replaced the flat thumbscrews on the Lansky sharpening system with these which will be easier to turn.

Designed for a press fit, so includes the parts to press it into place.

See the photos for how to assemble. Screw goes into the thumbscrew part, then that goes into the press piece and the head piece goes in the socket end of the screw. Knipex Pliers Wrenches are perfect for the pressing operation, although something like a vise can do. There's provision in the head piece for a 5x2mm magnet, because otherwise it can be a bit finicky to stack all the parts together.

Three pieces:

  • M5 thumbscrew
    The actual part
  • M5 thumbscrew press spacer
    The threaded part of the screw goes in here for the pressing operation. If your screw is longer, scale this in the Z dimension so there is room. Make it at least as long as the screw you're pressing in, but a couple mm longer is a good idea.
  • M5 thumbscrew head press
    This goes in the screw head to make sure it gets fully pressed in, as it should be slightly below flush. Has a hole for an optional 5x2mm magnet to help it stick to the pressing tool.

Printing instructions

I've printed in all types of materials, so that's up to you. Very little vertical detail so layer height is also up to you, although I usually use 0.2mm because I print this at the same time as the item I most commonly use it on. I will usually up shells to 3 or maybe 4 but that isn't absolutely necessary.

Tagi