ZeroG Hydra - Wobble X (Ender 5 Plus)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Not so much as a remix but a re-draw in Fusion 360 of the Trident Wobble X adapter.
- Rating
- 5 / 5
- Likes
- 45
- Downloads
- 201
- Makes
- 1
- Views
- 2,421
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
First off thank you to the ZeroG team for making the Hydra. It works great compared to what the Ender 5 Plus had.
****** THIS BUILD IS FOR STEALTHBURNER. IF YOU ARE USING EVA, YOU WILL NEED DIFFERENT TOP MOUNTS AND LONGER LEAD SCREWS ******
This is a re-draw of the Trident Wobble X adapter. The original one had an issue where one side of the adapter had openings too big and the 3mm rods would simply fall out.
My version is nice and snug.
Also included are the 608 bearing top mounts. You will NEED this if you want to use the Wobble X system. Without it, the little ball bearings have a tendency to fall out since the rod may wobble too much without constraining the top of the rod.
Also included is a strain relief for the bed heater wires mounted to the rear arm.
TOP MOUNT - Ender5P Rear - needs support. Uses 2 M4x20 screws and t-nuts. The Ender 5+ has a weird setup where the back rail is a 2020. You can use this for the front 2 lead screws too. It is up to you.