SD Storage - Multiple Layer - SD, Mini & Micro
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€10.47 – €12.80 net (excluding VAT)
For file: set_06n_015mm_pla_mk3s_12h37m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €11.63 excluding VAT (range midpoint).
- Weight reported by the author
- 125 g
- Print time reported by the author
- 12.62 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
expandable SD card storage for SD, Mini and Micro.
- Rating
- 4.778 / 5
- Likes
- 99
- Downloads
- 475
- Makes
- 17
- Views
- 2,154
- Reviews
- 18
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Share Alike
expandable SD card storage for SD, Mini and Micro.
This model is compatible with my Nozzle Storage as well "Nozzle Storage - Multiple Layer - V6".
The Premade G-Code is at set matching the pictures.
Print instructions
Models
There are 3 model types, Bottom, Layer and Top.
The Bottom and Layer models come in 4 different types each fitting a specific SD Card size. To make a SD Storage unit you only need 1 Bottom and you can make for any SD card size you wish. The Layer models you can print as many as you want depending on how many SD card you need to store, and you can always add a new layer to your unit.
The Top you also only need 1 of, and there are 3 to choose between, Smooth, Text and Figure depending on how you would like the unit to look.
Printing
If you use the standard setting for PLA on a PRUSA printer, all the models can be printed without support, however you might want to use support if you print in PETG.
I recommend layer height at 0.20 or smaller as this will make the thread nice and smooth.
That is all you need to know, good luck.
Happy Printing! and don't forget to upload a picture of your result!