Oculus mounts to Skadis adaptors
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adaptors to hang the mounts on your Ikea Skadis pegboard.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 16
- Makes
- 0
- Views
- 218
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial
Liked those Oculus mounts made by Boopidoo. But I wanted to hang them on a Skadis Pegboard over my desk. So I designed these adaptors based on chrisb work
The headset adaptor is common for Rift, Rift S and Quest1&2 devices.
The touch controller adaptor is specific for the Oculus Rift CV1 mounts. Not sure how bad it would fit on another model. I could adapt it if anyone is really interested.
Printing recommendations:
Ideally you would choose to print the adaptors with the hooks on their sides for a stronger result. You could try it with brim and supports on bridges and overhangs.
But since the model is quite irregular and slim on its sides, I printed it with the hooks upwards, supports under those overhangs and a filament with strong layer adhesion at a decent print temperature (PETG being my choice). More easy and clean print, but beware the reduced hooks strenght.
There can be found a hook stress test among the downloable files. If unsure, print that first and “stress” it till it breaks so you can make an informed and safe choice.
Assembly:
I glued it with hot glue. Apply some between the parts, squeeze them together and then fill the holes for that extra grip.