1oz Paint Cup Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A small base to hold a 1oz cup at an angle to help reduce wasted medium such as paints or epoxy.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 7
- Makes
- 0
- Views
- 105
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Something I cooked up at work that hopefully will be of use to some of you.
We use small 1oz cups for epoxy and UV resin. In order to waste as little of it as possible, we would prop the cups against something to keep it at an angle. This didn't always work well, as sometimes the cup would either slump or roll out of place.
This base keeps the cup in one place, making it easier to use with one hand and allowing the liquid inside to pool at an angle against the edge instead of thinly across the flat bottom.
I highly suggest a shell (walls/top/bottom) count of at least 3 or 4 to make sure none of the contours are left sparse. Infill can be whatever you desire depending on how dense you want to make this.