Prusa mk3 black psu air conveyor
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
ATTENTION if you want to put the sponge on the edge you must use the version of the project without teeth!
- Rating
- 4 / 5
- Likes
- 8
- Downloads
- 34
- Makes
- 0
- Views
- 1,382
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
ATTENTION if you want to put the sponge on the edge you must use the version of the project without teeth!
Air conveyor for Prusa mk3s / + with black psu, this air conveyor was created to keep the power supply inside the enclosure (lack or similar), it will have to be fixed to the plexi and make holes or cuts on the plexi itself to allow airflow.
a soft adhesive sheath must be added around the edge that rests on the psu.
Convogliatore d'aria per Prusa mk3s/+ con psu nero, questo convogliatore d'aria è stato creato per mantenere l'alimentazione all'interno dell'enclosure (lack o simili), dovrà essere fissato al plexi e creare dei fori o tagli sul plexi stesso per permettere il flusso d'aria.
dovrà essere aggiunta una guaina adesiva morbida intorno al bordo che appoggia alla psu.