1 / 5
Enclosure Ikea Lack for Creality Ender 3 S1/S1 Pro
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The famous Ikea lack enclosure by @Ondřej Stříteský remixed to make it fit for larger printers like the Ender S1/S1 Pro.
- Rating
- 3.333 / 5
- Likes
- 135
- Downloads
- 433
- Makes
- 2
- Views
- 6,264
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Basic parts
- 2× IKEA Lack table
- 3× Plexiglass 445×542 mm, 3 mm thickness.
- 2× Plexiglass 220×535 mm, 3 mm thickness.
Fasteners
- 24× pan head screw, 5×20 mm for table legs, holder plexiglass and spool holder.
- 4× screw 6×50 mm, for top corners.
- 4× screw M6×30 mm, for bottom corners.
- 3× screw M3×10 mm, for door knops and filement socket.
- 4× screw M3×18 mm, for door arms.
- 7x threaded inserts M3, for the hinges, door knobs and filement socket.
- 4x Four Pronged T Nuts Captive Threaded Inserts M6 for Wood Furniture, for bottom table.
- 4× neodymium magnet, 20×6×3 mm, for corners.
- 4× neodymium magnet, 20×6×2 mm, for door arms.
Tools
- Screwdriver
- Allen key - 2,5mm
- Allen key - 6mm
- Hammer
- Superglue
- Drill + wood drill bits ø 2 mm, 5 mm, 6mm, 8 mm and 10 mm
- Tape measure
- Snap-off knife
- Ruler
- Pencil or marker
Replaced the spool holder with this model (for CleverB)to sit inside:
https://www.printables.com/model/369446-table-edge-spool-holder-ikea-lack-filament-spool-h
And for filement sensor bracket I used this model(for LW design):
https://www.printables.com/model/428965-ender-3-s1pro-filament-sensor-bracket