1 / 2
MK4 Reverse Bowden Adapter - Coupler edition
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remix to allow use of PTFE couplers (M10 and M6)
- Rating
- 5 / 5
- Likes
- 13
- Downloads
- 111
- Makes
- 1
- Views
- 927
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution
The original model had the PTFE tube feed directly into the print, which works fine, but I wanted one that supported PTFE couplers.
I have not tested it yet, but I modelled them so they should fit.
There is a version for the M10 coupler that passes the PTFE tube through it and mates with the same surface as the original, as well as an M6 version where the PTFE tube is stopped inside the coupler.
Printing instructions:
You will need to add support for the center inside the hole for the couplers.
- I've included pre-sliced GCODE with supports enabled for printing on the MK4.
- I've included a 3MF file so you can edit the slicing settings but want to keep the support settings.