PiInk - A Raspberry Pi Powered E-Ink Picture Frame
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.95 – €2.38 net (excluding VAT)
For file: PiInk_stand_4_Inch_0.15mm_PLA_MK3S_2h36m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.16 excluding VAT (range midpoint).
- Weight reported by the author
- 18 g
- Print time reported by the author
- 2.6 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
An E-Ink digital picture frame that gives images a natural aesthetic. Build Guide: https://github.com/tlstommy/PiInk
- Rating
- 5 / 5
- Likes
- 36
- Downloads
- 72
- Makes
- 1
- Views
- 2,041
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution
An open-source, low-power, digital picture frame that gives images a natural, paper-like, aesthetic.
Features:
- Web UI: A built-in interface to control PiInk and upload images over the network.
- Low Power: The E-Ink display only needs power to change images, allowing pictures to persist on the frame.
- Natural Aesthetic: No backlight and the unique E-Ink technology make images look as if they are printed onto paper.
Recommended Printing Settings
- Layer Height: 0.15mm
- Infill: 10%-15%
- Supports: Baseplate
Checkout Github repo for more info: https://github.com/tlstommy/PiInk