Wacky Print-in-Place Toy Car
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This cartoony toy car prints in place and drives around with its functional wheels. 4 wacky sizes available!
- Rating
- 5 / 5
- Likes
- 38
- Downloads
- 291
- Makes
- 8
- Views
- 1,032
- Reviews
- 7
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Cartoony print in place toy car! Just print it in the orientation in the file, no supports needed. Four different sizes are available, but medium or large is probably the one you want to print.
Lengths:
Small: ~5,5cm / ~2.1″
Medium: ~7,3cm / ~2.9″
Large: ~11cm / ~4.3″
Huge: 20cm / ~7.8″
Post-processing:
The only thing you need to do is rotate the wheels to loosen them from any possible fused spots. In the beginning the wheels might be a bit stiff and lock up sometimes, but the more you roll them the better they turn. I recommend adding some silicone lubricant in the axles so the wheels roll as smoothly as possible!