Away Suitcase Compression Pad Rod Connector
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The rod for my Away suitcase's compression pad snapped so I needed a way to fix it. I tried tape and glue but that…
- Rating
- 5 / 5
- Likes
- 5
- Downloads
- 90
- Makes
- 1
- Views
- 1,115
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution
The rod for my Away suitcase's compression pad snapped so I needed a way to fix it. I tried tape and glue but that wasn't enough because the rod goes through a lot of stress as it's bent. So I made a quick tube in CAD that would connect the two ends of the broken rod.
I was able to print this without a brim, but you may need one depending on your bed adhesion. The inner wall is meant to be a tight fit, so it will take some force to get in there, but once it's in, the friction will keep it in place.
Print Settings
Rafts:
No
Supports:
No
Resolution:
0.2 mm
Infill:
100%
Filament: Overture PLA Black
Notes:
Print at a higher temperature and use all walls to maximize strength
Category: Replacement Parts