Away Suitcase Compression Pad Rod Connector
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The rod for my Away suitcase's compression pad snapped so I needed a way to fix it. I tried tape and glue but that…
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 90
- Wydruki
- 1
- Wyświetlenia
- 1115
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
The rod for my Away suitcase's compression pad snapped so I needed a way to fix it. I tried tape and glue but that wasn't enough because the rod goes through a lot of stress as it's bent. So I made a quick tube in CAD that would connect the two ends of the broken rod.
I was able to print this without a brim, but you may need one depending on your bed adhesion. The inner wall is meant to be a tight fit, so it will take some force to get in there, but once it's in, the friction will keep it in place.
Print Settings
Rafts:
No
Supports:
No
Resolution:
0.2 mm
Infill:
100%
Filament: Overture PLA Black
Notes:
Print at a higher temperature and use all walls to maximize strength
Category: Replacement Parts