Case for BM31 Moisture Measurer
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€11.84 – €14.47 net (excluding VAT)
For file: bm31-case-lid-and-base_02mm_pla_mk3s_13h0m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €13.16 excluding VAT (range midpoint).
- Weight reported by the author
- 168 g
- Print time reported by the author
- 13 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This a simple case for the BM31 moisture measure instrument.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 14
- Makes
- 0
- Views
- 383
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
This a simple case for the BM31 moisture measure instrument. I wanted to have one without buying any of the expensive ones. It fits the device perfectly. It's possible to add some small rubber pads to the inside so that it lays on a softer material than PLA, but it's not a requirement.
Print instructions
No supports are needed. For sturdy print I recommend min. 3 walls. A gyroid infill of 15% should do.
Color change layer can be used to have the letters and the base/lid more pronounced.
The provided gcode file does pause for a filament color change.
After the print, a 1.75mm filament (PETG recommended) or a thin wire can be used to connect the hinges between the two parts.