1 / 2
Dell Monitor Vesa Adaptor (S2x18, S2x19 monitors) — image 1
1 / 2

Dell Monitor Vesa Adaptor (S2x18, S2x19 monitors)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This print will allow you to use your Dell SE2419HR monitor with a VESA mount based monitor stand.

Rating
5 / 5
Likes
24
Downloads
392
Makes
0
Views
2,631
Reviews
1

Updated at source:

Model information

Category
Computers
License
Creative Commons — Attribution — Noncommercial

This print will allow you to use your Dell SE2419HR monitor with a VESA mount based monitor stand.

This will be compatible with any Dell montor that uses the same metal pivot on the stand.

To use:

  • Detach base from existing monitor stand - twist screw on bottom of stand
  • Detach existing stand from monitor - use a small screw driver to push in the hole at the top of the stand and slide down
  • Disassemble the stand - it unclips apart easily then unscrew the two screws in the aluminium core
  • Un-screw the steel pivot - its held by 3 M4 screws
  • Use the "Bear technique" to capture M4 nuts in the 8 hex holes in the printed part - see https://guides.bear-lab.com/Guide/1.+Preflight+check+and+disassembly/34?lang=en step 2.
  • Screw the steel pivot onto the printed part with 3 x M4x18mm cap screws
  • mount the monitor :D

Print instructions

Please use 0.2mm layer height for the hole bridges.
I printed with the following settings for strength:

  • 6 top and bottom layers
  • 15 perimiters
  • 50% infill

Tags