Sign of the Horns (low poly)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Make it light up your room or a concert (you need more of them..)!
- Rating
- 5 / 5
- Likes
- 27
- Downloads
- 78
- Makes
- 1
- Views
- 506
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other 3D Objects for Learning
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I still had flickering red LEDs lying around and decided to do something with them.
Made a low poly version of the Sign of the Horns, original by Dietz1 on thingiverse.
The intention was to make a hollow version and then add the LED + battery and switch. Because hollowing out was not possible in the software I used, I decided to print with 0% infill and 4 perimeters. The screw holes for the M3 bolts are blind holes in the bottom of the model, the slicing method transformed these into tubes in which the bolts can be attached.
I added a bottom cover that includes a cutout for a switch. As a battery I used 2 AA penlites that were placed in a standard holder. I attached the led to rigid electricity wires so that I could position them easily.
Because the batteryholder was black, I wrapped it in white paper, so it would not shine through so much.
Printing
The hand:

- Infill 0%, so NO INFILL!
- Perimeters = 4
- Top Layers = 4
- Bottom Layers = 0!
- Layers height = 0.2
- Nozzle = 0.4
- Outher Brim is advised for stability
The Bottom Lid:
- Infill 30%
- Perimeters/Top Layers/Bottom Layers what you normaly use..
- Layers height = 0.2
- Nozzle = 0.4
I used translucent PLA (brand R3D)
Hardware
Flickering red leds (4 or 5 pieces)
I used these: Red flickering leds

Battery holder for 2 AA penlites

Switch
I used such one: 2 pin on/off switch

Connecting wires and soldering.
2x M3 sunken bolt 10 or 12mm long.