Pencil sharpener mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Wall mount for the X-ACTO Bulldog manual pencil sharpener.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 19
- Makes
- 0
- Views
- 531
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Wall-mounted
- License
- Creative Commons — Attribution
X-ACTO Bulldog manual pencil sharpener wall mount.
There is a small C clip holding the suction lever in place. Remove it with a small flat head screwdriver. Pull out the lever and it will come apart easily.
For #6 drywall screws.
Do not snap together fully before mounting to the wall. You can check the fit but be careful not to push it together all the way before mounting it to the wall. It is designed to be a tight fit. It is a little difficult to get apart once it's together.
Tested with PLA. It will work. ABS or ASA would be ideal. Use 30% hex infill or it will
be a little flimsy.
If you remix please give me credit.
Happy Printing!