1 / 14
Replacement propeller and motor of a pocket fan - ARCTIC AIR — image 1
1 / 14

Replacement propeller and motor of a pocket fan - ARCTIC AIR

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

My sister asked me if I could fix her pocket fan because after a fall the helice and the engine were broken.

Rating
0 / 5
Likes
8
Downloads
74
Makes
0
Views
480
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

The first fan I found in did not exactly match, so I had to model the entire front facade in order to adapt it :(. Result of this first and long test was that the engine was really not powerful enough:(. So I looked for another solution and this time I tested the engine to see if it would be powerful enough. I used a fan that I had recovered in a battery charger screwdriver HS (laborious disassembly), I found a solution to fit it on the original shell, but the problem is that the propeller did not fit at all and so I had to model a new propeller and I had never done it before and I really did not know if the result would be conclusive. In conclusion, I can say that I spent a lot of time on this repair because I had never disassembled this kind of engine before. But in making this repair I learned new things and in addition I pleased my sister :).

 

I added in the files the first pieces that I had modeled for the first test. You never know it can be useful to someone:)

Tags