Replacement propeller and motor of a pocket fan - ARCTIC AIR
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My sister asked me if I could fix her pocket fan because after a fall the helice and the engine were broken.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 74
- Wydruki
- 0
- Wyświetlenia
- 480
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The first fan I found in did not exactly match, so I had to model the entire front facade in order to adapt it :(. Result of this first and long test was that the engine was really not powerful enough:(. So I looked for another solution and this time I tested the engine to see if it would be powerful enough. I used a fan that I had recovered in a battery charger screwdriver HS (laborious disassembly), I found a solution to fit it on the original shell, but the problem is that the propeller did not fit at all and so I had to model a new propeller and I had never done it before and I really did not know if the result would be conclusive. In conclusion, I can say that I spent a lot of time on this repair because I had never disassembled this kind of engine before. But in making this repair I learned new things and in addition I pleased my sister :).
I added in the files the first pieces that I had modeled for the first test. You never know it can be useful to someone:)