1 / 10
Ghostbusters Light Remix
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A Ghostbusters Light Remix
- Rating
- 0 / 5
- Likes
- 21
- Downloads
- 81
- Makes
- 0
- Views
- 765
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial
I add Connectpoints to connect multiple Parts to make the light bigger and use for both Sides (on Window for example).
The Hole on the bottom is 27mm for little Lamp Bases.
The Pins are 7,8mm big and long enough to connect 3 Parts. Maybe you need to underscale the Pins, if your Printer print bigger in measurement.
If you already printed the original you can add this Part with: Bot Part, mid Part and Connector for Original. If you only printed the colored Parts, you can use the optional top part.
Parts:
- Top Part (Edited from Original)
- Bot Part (Mirrored Top Part)
- Mid Part
- Connector Pin
Optional Parts:
- Connector for original
- Optional Top Part