Y-SPLIT JOINT For Bambu lab X1-Carbon
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Yジョイントとプリンターの継ぎ手の間のパイプは25mmにカットしてつないでください。 Cut the pipe between the Y joint and the joint of the printer to 25 mm and…
- Rating
- 0 / 5
- Likes
- 43
- Downloads
- 304
- Makes
- 0
- Views
- 1,710
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bambu Lab Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Yジョイントとプリンターの継ぎ手の間のパイプは25mmにカットしてつないでください。
Cut the pipe between the Y joint and the joint of the printer to 25 mm and connect it.
プリンター側の継ぎ手には写真のように大きめのC面取りを追加してください
Add a large C chamfer to the joint on the printer side as shown in the photo.
3Dプリント品部品のほかに下記部品が必要です。
In addition to the 3D printed parts, the following parts are required.
*M6ねじ-Φ4ワンタッチ接手：3個
M6 screw - Φ4 push-in fitting available on Amazon:3pcs https://amzn.to/3QMh2Tv
*M3x8の六角穴付きボルト：2本
M3x8 Cap screw:2pcs
Print Settings
Rafts:
No
Supports:
No
Resolution:
0.12
Infill:
15%
Category: 3D Printer Parts