1 / 6
Swivel Trays for Honeycomb Storage Wall (HSW) — image 1
1 / 6

Swivel Trays for Honeycomb Storage Wall (HSW)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Tray storage that can store away on HSW. Plenty of options for arrangment and size.

Rating
4.909 / 5
Likes
685
Downloads
1,222
Makes
14
Views
5,709
Reviews
11

Updated at source:

Model information

Category
Organizers
License
Creative Commons — Attribution — Noncommercial

I saw a few different pivoting designs for stand alone and got inspiration from them.  I ended up designing this from scratch with OnShape.  I am still learning and there are a few more things I would like to do with this so expect some updates or a v2 in the future.

I'm all about options so I share that in this.  No supports are needed and I printed them in .24.  Mix and match from the options below to build out your desired arrangement.  Enjoy.

BOTTOM CONNECTOR: Optional heights of the tube and another set with a hole in the bottom.  The version with the hole is purely optional.  I made it because I had a plug get stuck in the tube and this would have helped me push if out.

  • Tube Heights: This is the height of the tube on the outside.  Keep this in mind when you are mixing and matching trays/lids/spacers.  Sizes: 50mm, 75mm, 100mm, 125mm, 150mm.  150mm is shown in my picture.

TOP CONNECTOR: This fits in the tube of the bottom connector completing the connection to the panel.

TRAYS: I made a fair amount of them for your selection.  10mm - 75mm height in 5mm increments.  This is the outside height and what you would use when figuring out how many to fit on your bottom connector.


LIDS: Just a smattering of some covers.  Use them in between or at the top.  2mm, 3mm, 4mm, & 5mm available.

SPACERS: These are what they are.  Use them between or at the top/bottom.  1mm-10mm in 1mm increments.

PLUGS: These go in the tube before you put on the top connector.  They bring up the tubes internal bottom height if it is too deep.  I have also included half plugs if you want to mix it up.  If you have problems getting the plugs out I would recommend using the bottom connector with the hole.

 

Tags