Makita Drill Bit Holder (Magnetic)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
1/4" hex shank bit holder for Makita cordless drill.
- Rating
- 4.706 / 5
- Likes
- 523
- Downloads
- 2,346
- Makes
- 37
- Views
- 11,873
- Reviews
- 34
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
1/4" hex shank bit holder for Makita cordless drill. Magnetically holds 5 bits and can hold extra screws/bits underneath.
Print instructions
Printed Materials:
makita bit holder.stl
Non-Printed Materials:
1 - M4 x 14mm screw (https://www.amazon.com/gp/product/B071KBVZVV/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1)
5 - 6 x 3mm magnet (https://www.amazon.com/gp/product/B07MV2MKD5/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1)
Instructions:
- No supports needed
- Default bit holder for left side of drill/driver. Mirror in slicer before printing if you want it on the other side.
- Insert 5 6 x 3mm magnets in the holder alternating north and south so the magnets don't 'fight' each other.
- Attach to a drill/driver with a M4 x 14mm bolt. Threadlock may help.
Update 2020-05-02: Renamed makita-bit-holder.stl to makita-bit-holder-thin.stl. Print this at 0.2mm layer height to get 1 solid layer on the bottom. Updated makita-bit-holder.stl and makita-bit-holder.step with thicker bottom layer. This should print with 2 bottom layers to encapsulate magnets.