1 / 1
Bambu Lab P1S Dual Aux Fan VHB Mount — image 1

Bambu Lab P1S Dual Aux Fan VHB Mount

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A mount for "Bambu Lab P1 X1 Dual Aux Fan" that does not take up space at the bottom of the printer.

Rating
0 / 5
Likes
8
Downloads
33
Makes
0
Views
1,420
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

A mount for @Brody_499227's Bambu Lab P1 X1 Dual Aux Fan (https://www.printables.com/model/435312-bambu-lab-p1-x1-dual-aux-fan-725-updated) that attaches to the side of the P1S using 2.5cm VHB tape.

The mount uses the longer screws labeled “For P1P” that come with the aux fan and the rubber through-hole mounts that are pre-mounted with the aux fan to mount. I mounted the part by screwing in the fan from the top and then swinging the lower mount into place. If you would like to remove the aux fan you can unscrew the four screws.

 

I printed the fan in the example images with Bambu Lab ASA Black.

Tags