Decayed Master Sword Magnet
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Decayed Master Sword Magnet
- Rating
- 0 / 5
- Likes
- 17
- Downloads
- 47
- Makes
- 0
- Views
- 410
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
For the magnet version, I use 2x N52 Neodym Magnet size 2mmx6mm.
You need to print to halfs face down and mirror 1 on the x-axis (you can see it on the screenshot).
I also added a version for the AMS which is already oriented correctly and has colors applied.
After printing, just add 2 magnets to the holes and glue both halves together.
There are 2 other versions, which are “just” multicolor, but without magnets.
One has a ring, but besides that is the same.
There are AMS versions for them as well.
If you use the normal versions, you need to set the color in your slicer to the corresponding bodies. I named them already to the colors I am using, so it is just selecting the bodies and assigning the filament.
And load them as one object (Assemble, merge, depending on the slicer).