Simple door propping slide
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Tiny little latch to keep a door from closing fully. Useful if your door closes on its own while cracked open.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 20
- Makes
- 0
- Views
- 173
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution
I made this due to my door constantly closed itself, when the furnace or AC would kick on. My bedroom door is directly across from the intake, and would be pulled shut. This was particularly annoying when I was carrying something from another room, and would come back to a closed door.
This is meant to be very unobtrusive, and screw into the door trim.
Won't support a ton of weight, although I've accidentally tried to close the door with it deployed, and it didn't break. I printed it in ABS for this reason, I would imagine PETG would work well too.
The mount to the door needs to be printed flat, with supports. It screws to the trim with a small self tapping screw.