Silica gel triangular Box
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple silica-gel box with embedded mesh to place at the bottom of my filament box without loosing space.
- Rating
- 5 / 5
- Likes
- 10
- Downloads
- 64
- Makes
- 2
- Views
- 627
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Share Alike
Simple silica-gel box with embedded mesh to place at the bottom of my filament box without loosing space.
Two versions: L140mm and L60mm
Only one lid needed by box but you could use 2 for horizontal levelled positioning.
Print instructions
Category: Containers Summary
Simple silica-gel box with embedded mesh to place at the bottom of my filament box without loosing space.
Two versions: L140mm and L60mm
Only one lid needed by box but you could use 2 for horizontal levelled positioning.
Print Settings
Rafts:
Doesn't Matter
Supports:
Yes
</div>Notes:
Print with window down to embed a mesh, or as-is if you plan to add the mesh after (with tape, or ironing, ...)
If print as-is you may use supports depending of your printer's bridging capability.